RO-83 Wet Look

Highlights and heightens the natural tones of porous surfaces.

Product designed for bringing out and heightening the tone of surfaces naturally on baked clay, natural unpolished stone, brick, granite, concrete & slate. Creates an effective wet look on these surfaces and also offers lightweight water repellent protection.

  • Easy Application.
  • Natural effect.
  • Solvent.
  • Ph: Not applicable
  • Densitat: 0,90 Kg/L
  • Rendiment: About 5 m2 / L.
    NOTE: Performances are merely indicative. Actual results may vary.
  • Before application, ensure surface is clean, dry and totally free of moisture. In cases of newly placed tiles which generate salt in the curing process, you must wait until the end of this process before applying the product.
  • - Always follow the recommended application times. Longer application times can lead to the formation of corrosive vapours.
  • -Always wear the appropriate protective work wear (gloves, goggles etc.)
  • -Use product in a well ventilated area
  • -Keep out of the reach of children
  • -Do not drink this product
  • ALWAYS CARRY OUT A TEST ON A SMALL HIDDEN AREA BEFORE FULL APPLICATION!
  • 1. Surface should be clean and dry. Pour the product in to a clean tray
  • 2. Using a roller, brush or sponge, soak in the product
  • 3. Apply an even layer, using more or less depending on the porosity of material. On very porous surfaces you may require two layers.
  • 4. Allow to dry for 24 hours

Referències

Nom Referència De venda exclusiva a
RO-83 Efecto Mojado 1 l. 23987 Espanya
RO-83 Wet Look 1 l. 23988 UK
RO-83 Effet Mouille 1 l. 23989 França
RO-83 Effecto Bagnato 1 l. 23990 Itàlia
RO-83 Wet Look 5 l. 22959 Espanya, França, Itàlia, UK
RO-83 Efecto Mojado 1 l. HOL. 22985 Països Baixos

Per a envasos de gran volum consulteu disponibilitat.

RO-83 Wet Look pot ser utilitzat per a ...

Recommended by: