RC-40 Porous Surfaces Stain Remover

Absorbs oil and grease stains that have penetrated into porous surfaces like clay, limestone, concrete & asphalt.

For removing mineral and vegetable oil stains on very porous surfaces such as concrete, fired clay, tuff & asphalt, etc. The components dissolve fats and oils, then absorb the stain by descaling through the pores of the part. Great for surfaces that otherwise, due to its porosity would be extremely complex to clean.

  • Deep cleaning.
  • Leaves no marks.
  • High effective.
  • Easy application.
  • Solvent based cleaner.
  • Ph: Not applicable
  • Densitat: 1,72 Kg/L
  • Rendiment: About 2 m2 / L
    NOTE: Performances are merely indicative. Actual results may vary
  • Tetrachloroethylene, Talc, Xylene
  • Tetrachloroethylene, Talc.
  • - Highly Flammable
  • -Always follow the recommended application times. Longer application times can lead to the formation of corrosive vapours.
  • -Always wear the appropriate protective work wear (gloves, goggles etc.)
  • -Use product in a well ventilated area
  • -Keep out of the reach of children
  • -Do not drink this product
  • ALWAYS CARRY OUT A TEST ON A SMALL HIDDEN AREA BEFORE FULL APPLICATION!
  • 1. Shake well before use.
  • 2. Apply product directly to stain ensuring it is completely covered
  • 3. Leave to work for 24 hours.
  • 4. Sweep up the white dust generated using a brush or broom
  • 5. Repeat the process if necessary

Referències

Nom Referència De venda exclusiva a
RC-40 Quitamanchas Superfícies Porosas 1 l. 23935 Espanya
RC-40 Nettoyant Taches Pour Surfaces Poreuses 1 l. 23937 França
RC-40 Porous Surfaces Stain Remover 1 l. 23936 UK
RC-40 Smacchiatore Superfici Porose 1 l. 23938 Itàlia
RC-40 Quitamanchas Superfícies Porosas 1 l. HOL. 22940 Països Baixos

Per a envasos de gran volum consulteu disponibilitat.

RC-40 Porous Surfaces Stain Remover pot ser utilitzat per a ...

Recommended by: